Steyr Plus 40 Tractor - Scale 1:16

Steyr Plus series tractors were manufactured in Austria from 1966 to 1979, encompassing various power classes and configurations. From the Type 40 onward, all-wheel drive became available. Tractors were also offered with a driver's cabin upon request.

I primarily designed this model for my children's playtime. The parts are straightforward to print, and most require no support structures. It's not a scale model; I deliberately omitted certain delicate details.

The front wheels are secured with two M3x16 screws, while the rear wheels are mounted onto a spring steel axle. I avoid printed axles, resulting in a more robust and smoothly rolling model.

You can find a matching trailer for this model here:

Zweiachsiger Anhänger - Maßstab 1:16 von Martl83 - MakerWorld

Additional parts required:

M3 x 16mm screws, 2 pieces

Steel axle, 3 x 76mm, 1 piece

Federstahldraht 1000 mm 3.0 mm Reely 1 St. kaufen (conrad.at)

Filament used:

Extrudr PLA NX2 White

Extrudr PLA NX2 Hellfire Red

Extrudr PLA NX2 Anthracite

Extrudr PLA NX2 Black

Extrudr PLA NX2 Silver