Search models, users, collections, and posts
Small Modular Hydroponic Tower
IP Report
Print Profile(1)
0.16mm layer, 2/3 walls, 15% infill, PETG, Textured PEI
Designer
10 h
4 plates
Open in Bambu Studio
Boost
250
623
40
33
439
208
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- Pump x 1: https://www.amazon.de/dp/B0BW33SMVP
- Angled tube x 1: https://www.amazon.de/dp/B0B8ZSR135
Description
I remixed the original because the holes in the filter-spacer were missing and the box for the water and pump was too small and without a manitance opening for pooring water and measuring the PH- and EC-levels.
Printed with PETG for water resistance
Tip: The tank can also be coated with epoxy resin for better cleaning and watertightness.
Print list:
- 1x: Watertank and Cover Watertank
- 2x: Filter with holes, Cover
- as often as you like: Plantingmodule and Netcup
Pump: https://www.amazon.de/dp/B0BW33SMVP
Hose: https://www.amazon.de/dp/B075V7ZK5L
Angled tube: https://www.amazon.de/dp/B0B8ZSR135
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (40)