Optimized Litho Frame for Bambu CMYK LED Bord - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

maCyo42

Art>Other Art Models

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.16mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

4.8(422)

8mm higher for wider Angle in Portrait 0.16mm layer, 2 walls, 10% infill

Designer

3.5 h

1 plate

4.7(69)

0.16mm layer, 2 walls, 10% infill

4.1 h

1 plate

4.9(80)

Open in Bambu Studio

Boost

825

1747

661

344

4.9 k

3.8 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

CMYK LED Backlight Board (1pcs) - FAZ007

Bambu CMYK LED Backlight Board

Description

⚠️ Important Notice – Please Read Before Printing an AMS Riser
Due to a license change by benlevi, the original creator of my AMS Riser V2, I am no longer able to update the description of this model. I have already reached out to Support about this issue, but they were not able to help me – because of the license change, this situation is simply how it is, there is nothing more I can do on my end to modify the listing.

I'm currently receiving an increasing number of complaints from users who have printed the Riser V2 for the Bambu Lab P2S or X2D

⚠️ Compatibility – please double-check before you print:
Riser V2 → P1S, P1P, and X1C
Riser V3 → P2S and X2D
Printing the wrong version will result in fitment issues, as the printer dimensions and mounting points differ between generations.
Thanks for your understanding, and sorry for any confusion caused by the locked description – my hands are tied here, but I hope this notice helps clear things up!

Featured Remixes/Mods

This is an optimized Version of Bambu Labs Lithophane Frame.

Closed Frame
wider Angle for the Hinge
less Material about 103gr
on a minimum reduced Support Structure
Hinge is removable to replace it e.g. with a wall hook
closing mechanism
many small improvements

NEW v2 Online

shorter Pins lower risk of breakage

NEW v2 - "long Bottom" Online

features of v2
+ 8mm higher Frame - extension under the bottom for wider angles of the Frame

Instructions Lithophane: https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions

Bambu Store Links
PLA CMYK Lithophane Bundle: https://eu.store.bambulab.com/products/pla-cmyk-lithophane
Bambu CMYK LED Backlight Board: https://eu.store.bambulab.com/products/bambu-cmyk-backlight-board?variant=46880852935004

RELEASED 20231213

Issue: Oftentimes reported broken Pins
I try to reduce the broken Pins by reducing the length. If the Test is good theres an update this evening (20231213). Second issue is reducing the thickness of the clamps on the back to also reduce the broken ones. And i plan to release a second bottom Part to increase the height of the Frame to make a larger angle possible because of long usb c Cables. Stay tuned

A heartfelt thank you to the entire Makerworld community! Your creativity, continuous support, and inspiring collaborations mean the world to me. It’s amazing to be part of such a dedicated and innovative group. Let's keep making great things happen together!

Comment & Rating (661)

@user_562587122

Boosted

Worked great for me. First color lithophane on my new P1S with the Bambu kit. Need to make a bunch of these for gifts! I am going to try to make my own backlight with 5v led light strips. Need to test one to see if it fits, works, and if it saves me money over the ten buck Bambu lab ones.

(Edited)

@user_1323812928

If you do, please let me know where you found the lights. I've been searching Amazon and have had no luck finding lights that would work with USB-C.

@DWQ_990306535

5 $

@joeturczak

Print Profile

0.16mm layer, 2 walls, 10% infill

I logged this box way better than the Bambu model. so much easier to put the light board and diffuser in it. I like the frame stand better too. It doesn't feel like you'll knock it over easily.

@user_1323812928

Do you have a link to the file?

@joeturczak

Replying to @user_1323812928 :

https://makerworld.com/en/models/59185?replyId=458159&;replyType=3#profileId-61228

@user_1323812928

thank you

@devin.d.ford

Print Profile

0.16mm layer, 2 walls, 10% infill

Worked great, hinge for the frame arm was a tiny bit loose, just applied a little pressure to curl it down but other wise all tolerances were great! I ended up gluing down the litho since this is a gift and won't be changed, would love a version that slots the litho in as well to secure it.

The profile uploader has replied

@maCyo42

nice 👍 i think a slot for the litho doesn't work because it has different heights.

(Edited)

@devin.d.ford

Replying to @maCyo42 :

Yea that is fair, might try to play with a solution in fusion to maybe add small tabs at the top and bottom to secure it from falling out when tipped forward.

(Edited)

@Karma1990

It's a great frame, thanks for this model, but I can't get the bottom part to snap in, what am I doing wrong?

@andromedesign

This is a design flaw The protrusions should be more pronounced to ensure the temples remain secure

Show original

@StreetFighter

Boosted

Replying to @andromedesign :

They don't snap into place for me either

Show original

@Ikki86

Print Profile

0.16mm layer, 2 walls, 10% infill

Printed in PETG HF. Very cool.

@BuzzEye

Print Profile

8mm higher for wider Angle in Portrait 0.16mm layer, 2 walls, 10% infill

Overall good but clamps are weak and in that form are useless. Connectors for joining frame could have slightly tighter tolerances

@NiceCreate3D

Print Profile

0.16mm layer, 2 walls, 10% infill

Works great and better then the Bambu one. But maybe it would be good to have holes in both parts and use dowel as pins. Then you can print the dowels flat what would make it stonger. But I had not problems with it.

The profile uploader has replied

@maCyo42

good Idea 👍

@user_1664318405

Here's a lithophane I recently made for a friend. I like the frame design and just end up gluing the base in place since the pins don't hold it too well. Also, printing the white inner piece is completely unnecessary.

@skubiszm

Did you make the original photo? If so, how did you add that painting effect?

@Patric76

I think in US its not the same LED backboard than in EU sold by Bambulab. My version is much thicker than yours and doesnt fit in this kind of frame. And it doesnt have an USB C connection.

(Edited)

@Psilvestre46

you can get these from aliexpress, same dimensions as the ones from bambu US

@Twilix

Print Profile

8mm higher for wider Angle in Portrait 0.16mm layer, 2 walls, 10% infill

does not hold togethere without glue on PETG

@mikedrealtor

I had the same issue. With the backlight board and the diffuser in place, the two parts of the frame will not seat with each other, Yours got closer than mine.

(Edited)