Sewing bobbin base
Print Profile(2)
Description
Boost Me (for free)
Thanks for your support ❤️
Update on 7th of September 2025: See text below in red.
---
I made an insert for sewing bobbins (hope that this is the correct English naming).
Print profile 1: Four of these inserts fit into one drawer of the IKEA ALEX drawer unit with 36x70 cm.
Print profile 2: Two of these inserts fit into one drawer of the IKEA KALLAX drawer unit with 27.5x30.5 cm.
For now I have three plate types:
The first one is for Tojalock bobbins. These fit perfectly on it and that is why there is space for 9 parts.
The second one is for big no-name bobbins and can take 6 parts. Because the dimensions are like a cone, I do not mention them here. I recommend that you measure it in Bambu studio to check if yours fit.
The third one is for Madeira bobbins and can take 8 parts. This one is only available in the second print profile for IKEA KALLAX. If you need it for ALEX, too, give me a hint.
The bases can be fitted together with clips; no matter which one you have. There is one clip type for a center and one for the corners.
No supports or AMS needed.
Trojalock base (for ALEX): 142 g; 3 hours
No-name base (for ALEX): 92 g; 2 hours
Madeira base (for KALLAX): 110 g; 2.5 hours
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)