Ebola

This is Ebola. It is a dangerous virus - do not lick it.

Print your own ebola virus and put it on your desk! Stand included.

Print preparation:
Make sure that your print bed is clean and grease-free and use a quality brand filament.

Print settings:

Use the 0.20mm Standard settings in the slicer. Support is necessary for the virus. See my picture for the orientation of the model on the print bed that gave me the best print. If you are having issues with parts of the virus model being knocked-over, try to set z-hop for retraction in the extruder settings to 0.8mm.
I recommend to use fuzzy mode for the virus. This will give it some kind of rough look. And use adaptive layer height to hide the layer lines on the top of the round shell.

You can find all my settings in the print profiles. I added two of them: One for the stand and one for the virus.
BTW: The model is small enough to be printed on an A1 Mini.

Assembly:

There is no assembly. But putting the virus on the stand can be a little bit flimsy. Be carefull not to break the posts.

Congratulations! Now you have ebola.

If you want to support me you can leave a tip at ko-fi.com/blecheimer.

Disclaimer:
This work by blecheimer is licensed under a Standard Digital File License. It is for personal use only (e.g. printing, gifting, presenting, showing). All files and any prints of it must not be used commercially. Any form of charging money or collecting fees for this model is strictly forbidden.
Sharing, sub-licensing, selling, renting, hosting, transferring, distributing, adaptation or derivats in any form or format is prohibited. This includes remixes. Copying or hosting this model to other digital websites, online stores or cloud services in general is not allowed.