Search models, users, collections, and posts
Zero Deflection Stop Block
IP Report
Print Profile(2)
0.2mm layer, 2 / 4 walls, 15% infill
2.2 h
1 plate
Additional 3/4 insert. 0.2mm layer, 5 walls, 20% infill PETG
4.5 h
1 plate
Open in Bambu Studio
Boost
339
1560
74
59
831
530
Released
Description
I had trouble with my previous Stop Block having too much deflection, and my measurements were inaccurate. I also needed a little more reach because of the Incra track so I modeled this Stop Block. I included an insert for Rockler T Track as well. The Stop Block Base gets printed on its side with snug supports and the Front gets printed on it's face with no supports. No supports needed for any other parts. Makes and Comments Appreciated! Happy Printing!
Hardware Needed:
3 M5x 20mm Socket Head Bolts and Nuts
3 M5 Knobs. These are my favorites https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support
Edit:
5.27.24 Updated Front Logo
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (74)