Search models, users, collections, and posts
Soft Lure Injector
IP Report
Print Profile(2)
ABS 0.2mm layer, 4 walls, 30% Gyroid infill with support
Designer
7.8 h
4 plates
(A1 MINI ) 0.2mm layer, 4 walls, 30% infill
9.5 h
6 plates
Open in Bambu Studio
Boost
366
820
47
9
504
192
Released
Description
Really simple lure injector to print and assemble. I recommend ABS or any other material that can withstand the heat. It is 45mm in exterior diameter and 40mm interior, height 320mm. If you change the scale, check that there are at least 4 walls to avoid deformation. I added a tpu part which mounts on the slide but it is not necessarily necessary. I hope this model will be useful to you, good fishing.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (47)