Slim Raspberry Pi 5 Case by extrawitz

extrawitz

Hobby & DIY>Electronics

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

V2 - 0.2mm layer, 3 walls, 15% infill

Designer

59 min

1 plate

4.4(9)

Print with A1 mini

1 h

1 plate

5.0(1)

Boost

Released

Description

Case for the 2023 Raspberry Pi 5, released October 23th, 23

This case also has enough space so that it allows to use a low-profile cooler. (Recommended for Rpi5)

You can find the dimensions here: https://datasheets.raspberrypi.com/rpi5/raspberry-pi-5-mechanical-drawing.pdf

there are multiple tops available.

Important:

The enclosure-tops don't lock very tight on the base for easy opening and access to the onboard interfaces (GPIO, CAM etc.) It's meant to be whether a set and forget case like a for a NAS or for active tinkering at my desk, what I do most with Raspberries.

Comment & Rating (13)

@marcinus

Print Profile

V2 - 0.2mm layer, 3 walls, 15% infill

it printed easily and quickly. The cover don’t „snap” together so you need to some sort of glue or tape to merge it. Apart from this, really usable and free part!

@Prilchen.de

Print Profile

V2 - 0.2mm layer, 3 walls, 15% infill

Perfect - Great Job

(Edited)

@Prilchen.de

Ausgedruckt, eingebaut, passt! :-) Werde ich auf meiner Webseite unter https://prilchen.de/raspberry-pi-5-einstieg-was-braucht-ich-fuer-den-start/ verlinken - Danke

(Edited)

@eggggg

Print Profile

V2 - 0.2mm layer, 3 walls, 15% infill

Came out nicely. Lid isn't super snug but works just right for my purposes! standoffs fit beautifully

@alessandr018

Print Profile

V2 - 0.2mm layer, 3 walls, 15% infill

@brenden.mulhern

Print Profile

V2 - 0.2mm layer, 3 walls, 15% infill

I think the designer needs to make the case top lock into base and make the mounting hole pegs operate correctly and actually click into place. Thanks for the effort helped me learn and move forward

The designer has replied