Search models, users, collections, and posts
Print Profile(2)
0.2mm layer, 2 walls, 10% infill
10.6 h
2 plates
Scaled down 20% for A1 Mini
8.8 h
2 plates
Open in Bambu Studio
Boost
80
217
19
19
396
157
Released
Description
This is a vertical stand for the Pico 4 VR Headset and its Controllers.
Split into multiple pieces for easy printing. The highest part is about 20cm high. Pieces slot together with a relatively high amount of play.
Needs gluing together after printing.
Supports are only needed for the slots when printing. I used 3 wall loops and 25% infill.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (19)