chsi76

cover

IMG_0358.jpeg

IMG_0359.jpeg

Hex Spool left v2

plate_1.png

Hex Spool right v2

plate_2.png

IMG_0357.webp

plate_2.webp

plate_1.webp

0.3mm layer, 2 walls, 10% infill

sonofissachar

20240615_180941_7cdcee53-b791-424a-a794-b9719391d776.webp

Introducing the Bambu Refillable Spool with optimized settings and change the layer height from 0.3mm to 0.2mm for a more reliable print quality.

0.2mm layer, 2 walls, 15% infill

Julian.1905

IMG_6928.jpg

IMG_6929.jpg

Für das Neue PETG-HF Filament von Bambu Labs mit angepasstem Druckprofil das c.a 5 std brauch

For Bambu Lab's new PETG-HF filament using a customized print profile that takes approximately 5 hours

PETG-HF / 0.16mm layer, 2 walls, 15% infill

KytoPoly

IMG_2091.jpeg

I changed some patterns to concentric to make PETG prints faster for the .4 nozzle.

[PETG/Concentric] 0.28mm layer, 2 walls, 15% infill

Dezdoghound

IMG_20250724_162217970.jpg

IMG_20250724_162148920_HDR.jpg

<ul><li>Ultra fast sub 3 hour total print time</li><li>PLA filament</li><li>0.4 mm nozzle</li><li>0.24 layer height</li><li>optimised infil strategy</li></ul>

0.24mm layer, 2 walls, 15% infill

Hex Spool Locking Key

plate_3.png

0zymandias

unnamed.jpg

This is identical to the original remix file. I&#39;m calling it SAFE PLATES because it&#39;s a convenient, lower risk arrangement with the tiny locking insert on its own separate plate. This is for people (like myself) who would rather not risk that little guy separating from the plate and ruining the larger piece.

0.3mm layer, 2 walls, 10% infill, SAFE PLATES

Chris

IMG_0842.jpeg

IMG_0843.jpeg

IMG_0844.jpeg

Since nobody had a profile for just the filament spool locking clip, I put one together. <ul><li>Printed in ABS GF</li><li>0.3mm layer</li><li>2 walls</li><li>10% infill</li><li>3mm brim</li></ul>

ABS GF, 0.3mm layer, 2 walls, 10% infill, 3mm brin

By The Sea 3D

image_2025-01-10_152746714.png

I&#39;ve printed probably 10+ of these love this design.

Sliced for 0.6 nozzle and speed

Yasiek

IMG_20250306_230811.jpg

PET-G 3 walls layer: 0,2 mm, linearbrim

PETG, 0.2mm layer, 3 walls, 20% infill & BRIM (YL)

Accurate 3D Services

IMG_0238(1).JPG

Almost the same as the original, however I painted the sticker plate to provide some contrast, since the stickers are clear, and the text is black.&nbsp;

Colored Sticker Plate For Improved Visibility

SimRacerMikey

tempImage3flfHl.jpg

0.6 nozzle optimised for quick printing with Bambu PLA basic

0.6mm nozzle, 0.42mm layer, 3 wall quick print

6SpeedSRT

IMG_2656.jpeg

0.8mm nozzle, 0.4mm layer, 10% infill

Trazelman

IMG_5469.jpg

IMG_5470.jpg

this model has trimmed edges to fit an A1mini plate.  This does not affect use.

A1 Mini, Trimmed edges, 0.2mm layer, 2 walls, 10% infill

Filament_spool_Up.jpg

Filament_spool_seam.jpg

<ul><li>0.6 mm Nozzle Settings</li><li>0.24 mm Layerheight</li><li>Arachne</li><li>Wall sequence → Inner/Outer/Inner</li><li>4 Walls</li><li>4 Bottom shell layer / 4 Top shell layers</li><li>Infill → 15% Cubic</li><li>Scarf enabled (but the seam is still visible)  </li></ul>

0.6mm nozzle, 0.24mm layer, 4 walls, 15% infill

nagifur

20250918_165900.jpg

Sliced with differently colored inside of the spool that&#39;s usually not visible. Use this if you want to use a color for outside that&#39;s visible, while using a less pretty material for the inside fill that wont be visible once the filament is put on the spool. Here, for example, I wanted a white spool outside to match the colors of my already owned spools, but made the inside from a gray filament I never use, to save on the white.  AMS switching waste reduced by flushing in colors into the small locking bit on the side on plate 1. ~5g of flushed+ tower PLA

0.3mm layer, 2 walls, 10% infill, AMS 2 Colors

Jimgoo

IMG_1193.jpg

IMG_1253.jpeg

IMG_1194.jpeg

IMG_1195.jpeg

I don&#39;t always have the stick-on labels available, so I created a simple snap-on label that makes it easy to identify the filament material. This can also be easily customized to add whatever text you want.  I printed in PLA, but if you intend to leave this on while drying filament, printing in PETG would be better.

Snap On Label

Brandido02

Bambu Reusable Hex Spool

Just a small modification to @brandido02&#39;s excellent design. I added an area for labeling to the right half of the coil.&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you find my design useful, please boost this model. </boostcontent></boostme>

Print Profile(16)

Description

Comment & Rating (10759)

This remix is based on

License

Remixes (20)

Related Models

Bambu Reusable Hex Spool with Label