Search models, users, collections, and posts
Night Vision Monocular Functional
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.4 h
2 plates
Open in Bambu Studio
Boost
2
0
0
0
1
0
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- TP4056 x 1: for battery charge and power
- KCD1-101 rocker switch x 1: power switch
- TATTU 3.7V 800mAh 25C 1S LiPo x 1: You can use any 1 cell battery but these are the ones that i designed to fit.
- SON-LC02A LCD screen x 1: this part can be hard to find sometimes. but i have often found it on amazon, ebay, and aliexpress
- Foxeer Mini Cat 4 x 1: You can use similar FPV cameras as long as they offer the following. Analog video out, same physical size, and a removeble IR filter
Description
I wanted to make an inexpensive, small, and portable Night vision monocular. many of the ones i have found are either way to expensive or dont have an updated parts list.
The camera is very lightweight with top and bottom mounting holes so you can make your own mounting options for it.
You will need some kind of IR emitter for this to work well is very low light conditions, You can either get an ir flashlight or some other ir emitter.
Also works with an IR laser
STEP files available
for wiring i recommend soldering experience.
You will have to modify the body of the LCD, Be sure to cut off or sand off these “wings” on either side of the LCD
DO NOT SAND OFF THE ENTIRE SIDE
only the rounded wings
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)