Parametric Divided Tray

🗂️ Parametric Divided Tray

A practical and flexible fully parametric divided tray. Freely adjust the size and choose from 5 built-in partition layouts with a single click. The rounded outer shell and smoothly transitioned cavities look refined and are easy to clean — perfect for organizing desks and drawers.

Great for stationery, screws & parts, jewelry, cosmetics, cables and small office items.

✨ Highlights

• Fully parametric – adjust length, width and depth from shallow tray to deep bin.
• 5 partition layouts – 4-Grid, 2-Small-1-Large, 3-Row, 2-Column, or None.
• Rounded design – rounded shell and smooth cavity bottoms; easy to clean, no dust traps.
• Tapered shell – slightly narrower base for a clean look and stable stacking.
• Support-free – prints flat, no supports needed.

🎛️ Parameters

Layout options:

• 4-Grid – 2×2 equal cells for small items.
• 2-Small-1-Large – two small cells on the left + one large cell on the right.
• 3-Row – three horizontal strips for longer items.
• 2-Column – split vertically into two halves.
• No Partition – one large open space.

🖨️ Print Settings

• Material: PLA / PETG
• Layer height: 0.2 mm
• Infill: 10–15%
• Supports: Not required
• Orientation: Flat, opening facing up
• Tip: Scale down for very large sizes exceeding your build plate.

💡 Tips

• Choose No Partition for a clean open tray.
• Combine different layouts to build a full drawer organizer system.
• Increase depth for taller items; decrease it for a shallow sorting tray.

If you like this model, please give it a Boost, collect it, and share your Makes! 😊