Pubg - Statue

Here is the English translation, keeping the same structure and tone for the MakerWorld community:

🪂 PUBG Collectible - 18cm Figure (Multi-part)

Description: Get ready for the drop! Bring the Battle Royale adrenaline straight to your shelf with this detailed figure from the PUBG universe.

The model was designed with a focus on final quality and ease of production. The assembled piece stands 18 cm tall (excluding the base) and has been strategically cut into multiple parts. This division not only reduces the need for supports and print time, but also greatly facilitates the sanding and hand-painting process, allowing you to perfect the details and textures of the equipment and clothing.

⚙️ Recommended Print Settings

• Material: PLA or ABS
• Layer Height: 0.12mm to 0.16mm (ideal for preserving the fine details of the character and accessories)
• Infill: 10% to 15% (Gyroid pattern recommended)
• Supports: Yes. Tree supports are highly recommended for the more complex parts, ensuring a clean removal.
• Build Plate Adhesion: A Brim is recommended for smaller or taller parts to prevent detachment during printing.

🛠️ Assembly and Finishing Tips

1. Cleaning: After printing, carefully remove the supports and clean the contact points thoroughly.
2. Dry Fit: Do a dry fit test of all parts before applying any adhesive to ensure everything aligns perfectly.
3. Gluing: Use super glue (Cyanoacrylate / CA glue) for a firm and lasting bond between the pieces.
4. Customization: For a high-end collectible look, apply a thin coat of primer before starting your hand-painting. This will help the paint adhere better and highlight the realism of the piece.

Good loot and happy printing! Leave a comment or post a "Make" with your painted version!