Cascade Table Lamp
Print Profile(1)
Description
Cascade Table Lamp - a medium sized fluted table lamp with a warm glow. For use with E27 bulbs.
Boost Me (for free)
I'd appreciate a boost!
!!Shade and base are fully compatible with my newest lamp Cairn!! https://makerworld.com/en/models/2969601-cairn-table-lamp#profileId-3330183
Additional hardware required: Cord (https://www.amazon.com/dp/B0FT7JXZXS/ref=twister_B0CTKLBZHX?_encoding=UTF8&th=1)
** Assembly**
- Screw the first threaded nut onto the cord base
-Push the cord base through the aligned holes for the shade and base
-Screw the second threaded nut on the opposite side of the cord base and screw both until a tight fit is achieved
**Technical details**
- Dimensions: 6 inches wide × 10.6 inches tall (when fully assembled)
- Support-free
**Recommended print settings**
- Material: PETG
- Layer height: 0.2 mm · Walls: 2
- Infill: base 10-15%, shade 0%
- Seam position: Back — the seam then lines up with the cord exit and both turn to the wall
**⚠ Safety Warning — Please Read Before Printing or Installing**
-This model is designed for use as a decorative lamp. By downloading, printing, or installing this model, you accept full responsibility for its safe use.
-Not all filaments are suitable for use near heat sources. PLA has a low heat deflection temperature and is not recommended for enclosed or direct-contact lamp installations. Use heat-resistant materials such as PETG, ASA, or ABS. Good quality LED bulbs are strongly recommended — they run significantly cooler than alternatives.
**License** Free for personal, non-commercial use under the Standard Digital File License. Please don't reshare, resell, or redistribute the files or prints. Want to sell physical prints? A commercial license is available through my MakerWorld membership.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)