8BitDo Lite 1 Controller Button Replacement
Print Profile(1)
Description
Requires a 0.2mm nozzle. It's too small, a 0.4mm nozzle is unlikely to print it successfully.
A set of replacement buttons for the 8BitDo Lite 1 controller, mainly raising the action buttons, directional buttons, and the D-pad (used as a joystick) to varying degrees, and enhancing the appearance with silk gold filament (I think it looks good awa)
And a 4*1 mm magnet is embedded in the D-pad, allowing for a magnetic attachment of a round D-pad, which is more conducive to operating games that require precise joystick control.
Note: You'll need to figure out how to disassemble the controller yourself. The controller's structure is very simple. Pry open the back cover along the seam of the shoulder buttons, then remove the second layer of the back shell. Remember to disconnect the battery cable, and try to remove the battery. Unscrew the hidden screws inside, then pry up the small notch at the bottom.
Required parts: 4*1mm round magnets * 2
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (1)