E-14 Universal Socket Retaining Rings

This collection of models is designed to offer a definitive and robust solution for fastening E-14 lamp holders Whether you are restoring an old lamp or creating a new design from scratch, these rings ensure a secure hold and a clean finish

The kit includes three different configurations to adapt to every mounting need

1. Top Retaining Ring (Upper Ring): Featuring a wider flange for even load distribution on the lampshade
2. Bottom Retaining Ring (Lower Ring): A compact design, ideal for confined spaces or as a lock nut
3. Z-Scalable Spacer Ring (Spacer Ring): A versatile component designed to be scaled on the Z-axis directly in your slicer It is perfect for compensating for thickness differences between the lamp holder and the lamp structure

Main Features

• Total Compatibility: Optimized thread for standard E-14 lamp holders
• Robust Design: Reinforced geometry to resist heat (PETG or ABS is recommended for hot light bulbs)
• Easy to Print: Tested to be printed without supports with good bed adhesion

Project Description

This collection of models is designed to offer a definitive and robust solution for fastening E-14 lamp holders Whether you are restoring an old lamp or creating a new design from scratch, these rings ensure a secure hold and a clean finish

The kit includes three different configurations to adapt to every mounting need

1. Top Retaining Ring (Upper Ring): Featuring a wider flange for even load distribution on the lampshade
2. Bottom Retaining Ring (Lower Ring): A compact design, ideal for confined spaces or as a lock nut

3. Z-Scalable Spacer Ring (Spacer Ring): A versatile component designed to be scaled on the Z-axis directly in your slicer It is perfect for compensating for thickness differences between the lamp holder and the lamp structure

    

Organization of Print Plates (Print Plates)

To facilitate your printing experience, the file is organized into 3 distinct plates

• Plate 1: Top Ring – Includes the upper retaining ring with a knurled finish for easy manual screwing
• Plate 2: Bottom Ring – Includes the low-profile lower retaining ring
• Plate 3: Universal Spacer – A neutral ring Tip: unlock the proportions in your slicer and increase the height (Z-axis) to get the exact thickness you need

Printing Tips

• Material: PETG (recommended choice for thermal resistance) or PLA (only for cold LED bulbs)
• Layer height: 0.16mm

• For a successful print it is mandatory to use the Bambulab glue stick on the build plate.

•  If you have printed my model, please leave a comment with a photo and feedback, Boosts are highly appreciated if this model worked well for you, thank you very much!

   

• If you encountered printing issues, report them to me immediately so I can correct any errors.
  
   

👇🏻👇🏻👇🏻Check out my other models too👇🏻👇🏻👇🏻

👉🏻👉🏻👉🏻⭐️⭐️⭐️⭐️⭐️🤩 https://makerworld.com/it/@xSolowJonel/upload 🤩⭐️⭐️⭐️⭐️⭐️👈🏻👈🏻👈🏻