Quest 3 Controller Strap Fix Replacement Insert
Print Profile(1)
Description
Membership
💼 Commercial use: If you wish to commercially manufacture this product, I have added a commercial subscription. With an active subscription, you will gain the right to legally sell my models and simultaneously support me as a developer. A commercial subscription can also be obtained simply for support
Boost Me (for free)
Your support with BOOSTs on MakerWorld is very important to me, it gives me inspiration to keep working
🔧 Quest 3 Controller Strap Fix / Replacement Insert
Did the standard strap holder on your Meta Quest 3 Touch Plus Controller break or get lost?
No problem—I made a simple, repairable replacement that can be printed in minutes
This is a kit of several parts that allows you to
- 🔁 replace the original plastic element
- 🧵 install a new cord without complicated threading
- 🔒 securely fasten the strap without the risk of slipping out
⚙️ How it works
- The main part is pressed into the controller
- The cord is threaded through special slots and glued with superglue, this fixes the cord in the plastic element that is inserted into the controller
- Next, a sliding locking element is used
- It:
- is put on the cord
- is inserted into the housing
- is secured with a piece of filament (like a pin)
- is soldered with a soldering iron (or superglue can be added)
👉 As a result, you get a strong construction that is no worse than the factory one
🧵 Cord used
For this project, I used
- a cord with a diameter of 1.5 mm
- approximately 40 cm long
This size is optimally suited
- easily threads into the parts
- fixes well
- comfortable for the hand
👉 Important: the actual diameter of cords may vary slightly even with the same nominal value
🔧 Adjustment for a different cord
If you have
- a thicker or thinner cord
you can easily adapt the model
- change the size of the locking (sliding) element
- accordingly increase or decrease the holes for the cord
💡 The easiest way is to
- edit the model in CAD
- or change the scale of only this part in the slicer
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)