popeye

boost for free , don't let your boost expire , boost to help me get filament

popeye  the sailor man 

Project: popeye .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 113.14x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.8mm) swap to Blue Gray
    At layer #13 (1.04mm) swap to Silver
    At layer #20 (1.52mm) swap to Jade White for the rest.
 

if you can spare the time please rate , like or follow or just collect