Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.11x180mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#536c8b PLA esun grey blue Transmission Distance: 3.2
#9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
#d22332 PLA+ Sunlu Red Transmission Distance: 6
#ffbac3 PLA+ Sunlu sakura Transmission Distance: 6
#01b3ff PLA+ Sunlu Sky Blue Transmission Distance: 4
#fdcc1a PLA+ sunlu vivid yellow Transmission Distance: 2.6
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to grey blue
At layer #10 (0.88mm) swap to Ash Gray
At layer #13 (1.12mm) swap to Red
At layer #14 (1.2mm) swap to sakura
At layer #16 (1.36mm) swap to Sky Blue
At layer #19 (1.6mm) swap to vivid yellow
At layer #20 (1.68mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)