Hidden Pull-out Shelf Table Kit

Model Effect:

This model allows for adding a retractable table board to a shelf that can be raised to the same height as the shelf, occupying minimal space and facilitating space expansion in cramped areas.

Materials Required:

1. A wooden board (tabletop) 300mm deep, 10mm thick, with a width suitable for your shelf

2. A pair of 3-section 300mm drawer slides

3. M3*10 countersunk hex screws *12

4. D10*2.6mm (3mm also works) magnets *4

5. Printed parts

Scope of Application:

This model is directly applicable to assembled shelves with a depth of 400mm and a total board+frame thickness of 51mm; for those with a total board+frame thickness of < 51mm, the same effect can be achieved by directly adhering the slide rail brackets to the frame with strong adhesive.