build plate identification code
Print Profile(1)
Description
An identification code for a third-party build plate used with P2S, featuring quick-clip installation and reversible use, compatible with plates around 0.6mm thick.
Please print using PETG material; the identification code must be white, while other base colors are open for experimentation.
Easy to use, push upwards as shown in Figure 2. The insertion position varies depending on the build plate; compare with your original build plate and try.
For a comparison of effects between 0.2mm and 0.4mm nozzles, see Figures 3 and 4.
The ultra-thin design ensures the build plate will not interfere with calibration lines on either side (Figures 5, 6).
For those who find it troublesome, print a few more and glue them directly, as shown in Figure 7.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)