inline 2 vacuum engine
Print Profile(2)
Bill of Materials
- legoh 6L axle x 4: shafts for rockers
- legoh 5L axle x 4: wrist pins and crank pins
- Lego 8L axle x 2: output shafts
- Legoh 4M liftarm x 8: rockers
- 40 tooth gear x 1: cam gear
- 20 tooth gear x 1: crank gear
- 2L axle x 8: for the rollers on the rockers
- bushings x 8:
- half bushings x 8: 2 for rockers rest for crank spacing
- screws x 4: 36mm length and 4.2mm diameter including threads
- screw x 1: 10mm length 4.2mm diameter for chain tensioner
- legoh chains x 50: just buy a lot
- light springs x 4: height 9mm minimum
- stiff springs x 4: essential for the intake valves to seal
- spring kit x 1: https://www.amazon.com/dp/B0BVTDP29W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
- 2L liftarm x 8:
Description
my newest addition to my printed builds, the 450ss / r7 based i2!
at just under 12 hours, you can have a 4 valve per cylinder i2 that can rev past 3000 rpm with the right timing and springs.
some updates will be made in the coming days to remove legoh pieces in favor of a fully printed build.
check the part list for all outside parts required.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)