Modular container with drawers

Container that can be used as a bedside table, chest of drawers, or simply for storing objects.

It's been created from scratch and designed to waste as little material as possible.

The file contains 3 pieces on 3 different plates:

Plate 1 - container: this is the drawer, the main base

Plate 2 - this is the lid, used to close the drawer. N.B. if you stack multiple drawers, only one lid is needed because the drawers are modular and interlock.

Plate 3 - Door: used to open and close the container.

Assembly:

1- print the container/drawer

2 - print the door

3 - print the lid

4 - remove the various supports

5 - insert the door into the guide inside the container

6 - close the lid or another container by pressing it, both in the lid and in the container there's another parallel guide where the door must be inserted

to properly close the lid or another container, there's a slot where they fit into the edge.

7 - slide the door with a little force about ten times to remove printing impurities.

8 - place it in your home as you like! And thank you! For any clarification, send me a message.

Being modular, you can print the pieces in any colors you want! Create new ideas and leave me a review with photos!

N.B. in some print tests, the door turned out to be thicker on the side, this is not a file problem. It's simply solvable with a bit of sandpaper.

I hope you enjoy the project and thank you in advance