RC remote control glider
Print Profile(1)
Description
Boost Me (for free)
Hand-launched glider remote control glider
Refer to the accessory list, DIY required
Brushless motor, ESC, battery, propeller carbon fiber classic 9 x 6.5" / 23 x 16.5 mm
Propeller mount axle distance: 45 mm
Motor shaft hole: 3.17 mm
Gyro outer diameter: 35 mm
Servo 9g
Carbon tube 2x 8/6mm (outer diameter/inner diameter) x 740mm long - (for wing) 1x 8/6 mm (outer diameter/inner diameter) x 59 mm long - (for middle wing section) 2x 4/3 mm (outer diameter/inner diameter) x 729 mm long - (for wing) 1x 4/3 mm (outer diameter/inner diameter) x 59 mm long - (for middle wing section) 1x 4/3 mm (outer diameter/inner diameter) x 74 mm long - (front wing fixing rod) 1x 4/3 mm (outer diameter/inner diameter) x 72 mm long - (rear wing fixing rod) 1 piece 4/3mm (outer diameter/inner diameter) × 47mm long - (rod for fixing horizontal fin) 1 piece 2/1 mm (outer diameter/inner diameter) × 210 mm long - (for vertical rudder) 1 piece 2/1 mm (outer diameter/inner diameter) × 450 mm long - (for horizontal rudder) Wire 1 piece 0.8 × 520 mm long (for vertical rudder) 1 piece 0.8 × 470 mm long (for horizontal rudder)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)