Kitchen Scale Holder
Print Profile(1)
Description
I designed this Holder for a Kitchen Scale - The best about the design: It is parametric! So you can use your own measurements to perfectly fit for your scale.
The Configurable Parameters are:
- Length of the Holder
- Width = The Thickness of your Scale
- Wall Thickness - I recommend 3mm, but you can choose what you want
The space between the two pieces is given by the scale dimensions.
Boost Me (for free)
You like this design? Then please give it a Boost for Free - this helps me to create other useful Designs for you - Thank you very much :)!
The Holder has two Holes for each piece two screw it on your wall or your cabinet. Also you can use strong adhesive tape if you don't want to use screws. But be sure to check if it could hold your scale!
You can choose different mounting options. You can use it vertically like you can see it on my pictures. But you also can use it horizontal - for example under a shelf in your cabinet.
Printing Instructions
- 4 Wall Lines
- 0.2 mm Layer height
- 15% Gyroid Infill
- Use a BRIM with at least 10mm
Be sure to place the model correctly on the build plate after Downloading it like you can see in the following picture:
Press the Orientation Button at the top in Bambu Studio and then select the bottom surface
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)