Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 2 walls, 10% infill
Designer
9 h
5 plates
Open in Bambu Studio
Boost
529
1709
41
21
657
251
Released
Description
Inspired by the Dulton Double Sided Wall Clock
This model can be mounted on a wall or on an IKEA SKÅDIS pegboard.
For IKEA SKÅDIS mounting, an additional adapter is included in the print files.
Requirements
- 2 standard clock movements
I used clock movements with an 18 mm shaft.
The position of the clock movement can be adjusted using the additional filler included in the 3D print files.
The filler is 4 mm thick by default, but you can modify its thickness to fine-tune the final depth and alignment of the clock. - 3 × M5 × 20 mm bolts
- 3 × M5 inserts or nuts
Optional
- Magnets can be added for extra holding strength, but in my case they were not necessary.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (41)