Mesh Filter generator
Print Profile(7)
Description
Generate your own mesh filter with my parametric mesh filter generator or use few standard diameters
- for most use cases just change diameter
- if diameter is big change ring thickness/height for more stiff filter
- default tolerance is 0.2mm so it's quite tight, for example 0.2mm tolerance and 40mm diameter will result in 39.8mm print
- change wire mesh spacing if you want to have less dense mesh
- mesh wire size can be changed when printing with smaller nozzle or printing big filters which require more solid mesh
I will provide ready print profiles for 30/40/50/60mm filters with fine mesh for air vents etc.
You can also check my air vent generator here:
https://makerworld.com/pl/models/2135216-air-vent-generator
or rectangular filter mesh:
https://makerworld.com/pl/models/2146698-dust-filter-generator
If you want to use it outdoor use at least PETG
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)