AleksanderM

cover

IMG_20251213_131927462_HDR_AE.jpg

IMG_20251213_131937022_HDR_AE.jpg

IMG_20251213_131956862_HDR_AE.jpg

IMG_20251213_132014457_HDR_AE.jpg

IMG_20251213_132204201_AE.jpg

IMG_20251213_132211765_AE.jpg

plate_1.png

plate_2.png

Printed with:<ul><li>no supports</li><li>infill printed first - due to gradient of cover top</li><li>walls printed &#34;inner first&#34; - due to as above</li><li>3 wall loops</li><li>greater slow down for overhangs</li><li>external brim</li></ul>It is advisable to ensure very good bed adhesion due to small bed contact surface and infill printed first, so hotend might often be catching on printed infill. Also it might be good idea to set temperature 4-5 degrees above normal for your material.

0.2mm layer, 3 walls, 35% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Ceiling rose cover, designed to accommodate wireless smart switch that needs neutral cable. Smart switch usually requires neutral cable,   therefore they are not suitable for most of homes, as they cannot be mounted in wall switch back box (no neutral going there in most installations). Two versions, plain and ridged. Printed with no supports. Plain if you would like to paint it over. Strongly advise to print this out of ABS.

Ceiling rose cover

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models