Naruto Hueforge
Print Profile(1)
Description
Project: Naruto.jpg
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 145.86x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ff9016 PLA BambuLab Basic Orange Transmission Distance: 5.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Jade White
At layer #23 (1.92mm) swap to Orange for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (41)