Parametric Cable Management Plug
Print Profile(1)
Description
Upgrade the cable routing hole in your desk with a custom plug that retains 1 to 5 cables with appropriately-sized holes! Most configurations will use less than 15g of filament. The included print profile offers a 63.5mm plug (sized for a snug fit in the 64mm holes in my desk) with one to three 8mm holes, appropriate for most USB cables.
Be sure to auto-orient customized models so the top of the plug faces the bed. No supports should be necessary. If you find your printed plug is slightly too small for your hole, consider shimming it with a thin piece of cardboard!
Boost Me (for free)
All my designs are free and open-source.
I don't get credit for downloads when my designs are customized, so if you find this design useful, please consider giving me a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)