Print Profile(1)
Description
This is my newest Samsung Galaxy S24 case in prototype stage – with .step file – Halloween version 2 design.
No support is required in the slicer settings :-)
The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.
New Halloween version 2 but still a prototype! It's not perfect and I have a few changes planned.
I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.
Feel free to check out my other designs here -->
https://makerworld.com/en/@Toni_ThesBer/upload
See also Hexagon version 1 --> https://makerworld.com/en/models/229309
and Hexagon version 2 with AI text --> https://makerworld.com/en/models/229311
and Voronoi + OrganicLoop version 3 --> https://makerworld.com/en/models/432695
and Halloween version 1 --> https://makerworld.com/en/models/641265
Boost Me (for free)
If you love my work, consider boosting the model as well.
I’d always happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!
Happy printing & halloween 🎃
Toni :-)
License
Comment & Rating (1)