Attic Frog Lure
Print Profile(0)
Description
Model volume is 17.115g/cm³
Slicer's filament weight is 10.04g @ 4walls & 5%infill (My filament's density is 1.177)
So, the total weight of the lure including hardware such as hooks/split rings/twist eyes/spinner blades/tactical clip/ball bearing (rattle) MUST be below 17gram in order for it to float. This is ONLY an estimate, YMMV. But, if you stay within this parameter, you should be good.
Note: the legs will most likely sink and that's okay.
The picture of the lure is WITHOUT the legs, I got lazy and decided to use swivel and split rings instead of assembling the legs.
Video of lure action:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)