Spanu96

Acceleration.png

Advanced and G code output and post processing script.png

advanced.png

advanced_for supports.png

Advanced1.png

Bed adhesion.png

Bottom shell thickness and Sparse infill.png

Filament for supports and Advanced.png

Flush options and special mode.png

Initial layer speed and other layers speed.png

Layer height and line width.png

line width and Seam.png

Other layers speed and travel speed and acceleration.png

Precision and ironing and wall generator and advanced.png

Prime tower.png

Screenshot 2025-08-16 231528.png

Screenshot 2025-08-16 231714.png

Seam and Precision.png

Support and Raft.png

Top surface.png

walls and top and bottom shells.png

cover

2025-08-16 22.55.08.jpg

2025-08-16 22.55.16.jpg

2025-08-16 22.55.24.jpg

2025-08-16 22.55.31.jpg

2025-08-16 22.55.50.jpg

IMG20250816233726.jpg

plate_1.png

2025-08-16_2e7a79b1e4e09.jpg

Diameter nozzle  = 0.4 Flow = StandardMaterial PLA Matte0.20 mm Standard @BBL A1&nbsp;&nbsp;&nbsp;FOR QUALITYLayer height = 0.2 mmInitial layer height = 0.2 mm&nbsp;LINE WIDTHDefault = 0.42 mmInitial layer = 0.5 mmOuter Wall = 0.42 mmInner wall = 0.45 mmTop surface = 0.42 mmSparse infill = 0.45 mmInternal solid infill  = 0.42 mmSupport = 0.42 mm&nbsp;SEAMSeam position = AlignedSeam placement away from overhangs = none (or 0). Just uncheck the box in Bambu lab software.Smart scarf seam application = Check the boxScarf application angle threshold = 155Scarf around the entire wall = Uncheck the boxScarf steps = 10Scarf joint for inner walls = Check the boxOverride filament scarf seam setting = Uncheck the box.&nbsp;PRECISIONSlice gap closing radius = 0.049 mmResolution = 0.012 mmArc fitting = Check the boxX-Y hole compensation = 0 mmX-Y contour compensation = 0 mmAuto circle contour-hole compensation = Uncheck the boxElephant foot compensation = 0.075 mmPrecise Z height = Uncheck the box&nbsp;IRONINGIroning type = No ironing &nbsp;WALL GENERATORWall generator = Classic&nbsp;AdvancedOrder of walls = inner/outerPrint infill first = Uncheck the box.Bridge flow = 1Thick bridges = Uncheck the boxOnly one wall on top surfaces = Top surfacesOnly one wall on first layer = Uncheck the boxSmooth speed discontinuity = Check the boxSmooth coefficient = 80Avoid crossing wall = Uncheck the boxSmoothing wall speed along Z (experimental) = Uncheck the box.&nbsp;&nbsp;NOW FOR STRENGTHWALLSWall loops = 2Detecth thin wall = Uncheck the box&nbsp;TOP AND BOTTOM SHELLS Top surface pattern = Monotonic lineTop shell layers = 5Top shell thickness = 1Top paint penetration layers = 5Bottom surface pattern = MonotonicBottom shell layers = 3Bottom shell thickness = 0 mmBottom paint penetration layers = 3Internal solid infill pattern = Rectilinear&nbsp;SPARSE INFILLSparce infill density = 15% (you can go higher like 90%)Sparce infill pattern = GridLength of sparse infill anchor = 400% mm or %Maximum length of sparse infill anchor = 20 mm or %&nbsp;ADVANCEDInfill and wall overlap = 15%Infill direction = 45 degreesBridge direction = 0 degreesMinimum sparse infill threshold = 15 mm^2Infil combination = Uncheck the boxDetect narrow internal solid infill = Check the boxEnsure vertical shell thickness = EnabledDetect floating vertical shells = Check the box.&nbsp;&nbsp;NOW FOR SPEEDSlow down for overhangs = Check the boxOverhang speed       - 0 mm per sec (10%)      - 50 mm per sec (25%)      - 30 mm per sec (50%)      - 10 mm per sec (75%)      - 10 mm per sec (100%)&nbsp;Slow down by height = Uncheck the boxBridge = 50 mm per secGap infill = 250 mm per secSupport = 150 mm per secSupport interface = 80 mm per sec&nbsp;TRAVEL SPEEDTravel = 700 mm per sec&nbsp;ACCELERATIONNormal printing = 6000 mm per secTravel = 10000 mm per secInitial layer travel = 6000 mm per secInitial layer 500 mm per secOuter wall 5000 mm per secInner wall = 0 mm per secTop surface = 2000 mm per secSparse infill = 100% mm per sec or %&nbsp;&nbsp;NOW FOR SUPPORTSupports are disabled&nbsp;RAFTLayers = 0&nbsp;FILAMENT FOR SUPPORTSSupport and raft base = DefaultSupport and raft interface = Default&nbsp;ADVANCEDInitial layer density = 90%Initial layer expansion = -1 mmSupport wall loops = -1Top Z distance = 0.2 mmBottom Z distance = 0.2 mmBase pattern = DefaultBase pattern spacing = 2.5 mmPattern angle = 0Top interface layers = 2Bottom interface layers = 2Interface pattern = DefaultTop interface spacing = 0.5Normal support expansion = 0Support and object xy distance = 0.35 mmSupport and object first layer = 0.2 mmDon&#39;t support bridges = Uncheck the boxIndependent support layer height = Check the box&nbsp;&nbsp;AND FOR OTHERSBED ADHESIONSkirt loops = 0Skirt height = 1Brym type = AUTOBrim width = 5Brim-object gap = 0.1 mm&nbsp;PRIME TOWEREnable = Check the boxSkip points = Check the boxInternal ribs = Uncheck the boxWidth = 35 mmMax speed = 90 mm per secBrim width = 3 mmInfil gap = 150%Rib wall = Check the boxExtra rib length = 0 mmRib width = 8 mmFillet wall = Check the box&nbsp;FLUSH OPTIONSFlush into object&#39;s infill = Uncheck the boxFlush into object&#39;s support = Check the box&nbsp;SPECIAL MODESlicing mode = Regular Print sequence = By layerSpiral vase = Uncheck the boxTimelapse = TraditionalFuzzy skin = None&nbsp;ADVANCEDUse beam interlocking = Uncheck the boxInterlocking depth of a segment region = 0 mm&nbsp;&nbsp;G-CODE OUTPUTReduce infill retraction

0.2mm layer, 2 walls, 15% infill

This is my first 3D model, designed in Blender 3D. I know, I&#39;m a Blender guy, I prefer the flexibility over precision. I hope some of you will like it.  And sorry if I&#39;m a clown, this is my first time posting a 3D model here, of my own. It&#39;s 10x10 cm or 100x100 mm.

Cup support

ASIA

Print Profile(1)

Description

Documentation (21)

Comment & Rating (0)

License

Related Models