LaserCut Connection Sample

A quick sample piece, having had to explain methods of temporarily (or fairly permanently, basically, could be disassembled if needed) to hundreds of people over the last few years. 

This shows 3 (and a half) methods of joining lasercut panels.  

Using conventional fasteners (square or hex nut and screw) and a cross shaped cutout.

Using a 3D printed nut, which will self orient in a similar cross shaped slot, and a self tapping plastic screw.

And using a 3D printed clip, with a slotted tab, 

The  lasercut parts can be found at; https://makerworld.com/en/models/1648213-lasercut-temporary-joint-sample

as I couldn't work out how to upload them with the lasercut file.

Note: I've never tested this on a H2D as I don't have one, the parts pictured were cut on a standalone CO2 Laser