Stackable Hotwheels display stand

Summary

This is a stand I made for Hotwheels. It should work for any 1/64 model cars. I've included files for the straight, right angled, and left angled, as well as a blank rack piece and the wheel chock if you desire to change it. Each level sits on top of the lower one with the little holes for the posts in each corner. Please post any make or remix! I love seeing your creations.

Print Settings

Printer Brand: 

Prusa

Printer:                      

I3 MK3S

Rafts: 

Yes

Supports:                      

No

Resolution: 

.2 or .3 for speed

Infill:                      

I would do 10% infill

Notes: 
 

This is a pretty large platform, but there isn't really much detail, so you can get away with low infill and lower resolution. I would advise using a raft, since my first print warped quite a bit on one of the corners. Overall, it should be a pretty easy print.

If you like my models, please consider giving them a like and following me! This is my main hobby, so I release new models or work on older ones fairly often. If you're able to, I greatly appreciate any donations at my BuyMeACoffee!

I always follow my followers back! Hit me with a follow and I'll do the same 😀👍