Bosch GWS 12V-76 IKEA Skadis Mount

Search models, users, collections, and posts

Remixed by

detLAN

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

X1 Carbon

H2D

P1P

P1S

X1E

H2D Pro

H2C

A1 mini

P2S

H2S

X2D

A2L

V3 - 0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.9(16)

Simple V1 - 0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

364

408

271

Released

Bill of Materials

Bambu Filaments

Select all

Matte Marine Blue (11600) / Filament with spool / 1kg

PLA Matte

Description

Content has been automatically translated.

Show original

My objective is to mount my Bosch GWS 12V-76 cordless angle grinder to my Skadis wall, consequently, I have adapted the model by Henri_Robert to suit my specific requirements.

250617 Update

V3 supersedes all preceding iterations. The modifications implemented facilitate the single-piece, upside-down printing of the model. This ensures flawless curvatures and necessitates only minimal supports, which can subsequently be effortlessly removed.

Simple V1 introduces a novel model, which exclusively accommodates the device, including its hexagonal key.

Additional IKEA Skadis Mounts for the Bosch Professional 12V System

Boost Me (for free)

If you like this model, I would be happy if you could like 👍 and rate it ⭐️. If you have any questions or requests, feel free to send me a message 💬 via my profile at any time. A boost 🚀 would be a great support and helps me to continue creating fantastic models for you. Don't forget to follow me so you don't miss any updates. Thank you very much 🙏

Comment & Rating (45)

@layerwalddesign

Pinned by Designer

Print Profile

V3 - 0.2mm layer, 2 walls, 15% infill

I removed a divider using a negative volume in the slicer so I could store the extra protection Thanks for the file

The profile uploader has replied

Show original

@detLAN

Thank you for ★★★★★

Show original

@user_387095798

Print Profile

V3 - 0.2mm layer, 2 walls, 15% infill

super glue

The profile uploader has replied

Show original

@detLAN

Thank you for ★★★★★

(Edited)

Show original

@D0bbY

The print profile is no longer public

Fits perfectly 😊

The profile uploader has replied

Show original

@detLAN

Vielen Dank für die ★★★★★

(Edited)

@lars_coolik

Boosted

Print Profile

V3 - 0.2mm layer, 2 walls, 15% infill

Excellent 🙌

The profile uploader has replied

Show original

@detLAN

Model V2 has been superseded by V3 Thank you for the ★★★★★ and the double boost 😊

(Edited)

Show original

@lars_coolik

Boosted

The print profile is no longer public

Other Issues:Tried to print it a couple of times, but it always failed with PETG HF. It was not sticking on the plate and it also looked like some part is missing on the plate.

The profile uploader has replied

@detLAN

If you position the model on the build plate and leave the supports enabled as I have specified, there should be no problems You will then only need to adjust the settings for PETG HF, as I have used PLA

(Edited)

Show original

@lars_coolik

Boosted

Replying to @detLAN :

Yep, I've tried it a couple of times, but somehow always the front part was flaky. I mean, the design is awesome and I really wanted to have it printed, but after I think 6 attempts I gave up because it is then too expensive to print.

@pyo.nam

Never print this weird holder upside down. It doesn't hold on the plate.

The designer has replied

@detLAN

Problems with print bed adhesion are neither due to the model nor its orientation on the build plate - Slicer settings must be adjusted to the filament used if necessary - Calibrate your 3D printer - Clean your build plate - Use "3D glue" or similar products if necessary

Show original