Magsafe Wallet

MagSafe-Compatible Minimalist Wallet

This is a sleek, one-piece 3D-printed MagSafe-style wallet designed to work perfectly with low-cost magnetic rings like this one from AliExpress:
Link to Ring – 45mm ID / 55mm OD / 0.6mm Thick

Key Features:

• 🧲 MagSafe-Compatible: Designed to fit snugly with the 55mm outer diameter magnetic ring (sold separately).
• 🪪 Card Storage: Holds up to 4 standard cards, depending on card thickness.
• 🧩 No Assembly Required: Print it in one go — no glue, screws, or extra steps needed.
• 🧰 Flexible Fit Adjustment: Due to slight variations in card thickness, you can easily fine-tune the fit using a small strip of paper or tape on the inside.
• 🔁 Two Versions Included: One MagSafe-compatible and one non-MagSafe version for general use or DIY mounting.

🖨 Print Settings:

• Printed with a 0.4mm nozzle
• Layer height: 0.08mm for high detail