Water Level Float Hydroponics

Float for the hydroponic tower. This float is very slender, making it suitable even for oval pots that are narrower at the bottom than at the top, without the float resting on the bottom of the pot or bumping against the inside edge. Printable even without AMS, simply program a pause for filament changes at layer 750 and 900 respectively. The matching lid with a bore for the float can be found on the second print plate. Deactivate the cleaning volume and cleaning tower; this avoids harsh color transitions, resulting in a smooth finish. As desired.

May 3, 2025: Additional print profile for an off-center lid, providing more space in the pot for the float to prevent it from bumping against the edge. Simply rotate the lid so that the float is free and does not collide.