Hueforge Mario
Print Profile(1)
Description
Voici un tableau Hueforge Mario j'espère qu'il vous plaira !
Veuillez ne pas modifiez le Z pour cause de problème de couleurs.
Imprimé avec des bobines Bambu lab et Sunlu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 176.31x235mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 3.2mm and the Actual Depth is 3.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu Matte Blue Transmission Distance: 3
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Skin Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #13 (1.12mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #20 (1.68mm) swap to BambuLab Green
At layer #21 (1.76mm) swap to Orange
At layer #26 (2.16mm) swap to Skin
Border Only Colors from here until the end.
At layer #32 (2.64mm) swap to White for the rest.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)