CubeStack desk lamp (no glue, no supports)

Light your space with modern elegance

The CubeStack desk lamp is a striking blend of geometric design and mood lighting with its play of light and shadow
Constructed from carefully stacked and spaced cubes that look like they're floating in mid-air.
Its aesthetic makes it ideal for a desk, bedside table or workspace.
It enhances your décor with elegant sophistication and a warm, welcoming glow.

The height of this lamp is variable. you can print the middle part as many times as you need.

Assembly instructions :

Assembly of this lamp is very simple. However, if you have any problems, send me a message so that I can help you. I'll reply quickly.

To create an airy effect, the cubes are joined by a thin 2mm blade. To avoid to break these parts, don't pull too hard to unstick the piece from the plate. Wait until the plate is cold and bend it to loosen the piece :)

Place the lamp (Kit 001 or any other led lamp) in the base. You can stick it in place using the double-sided adhesive supplied.
 

Insert the pins into the slots in the base (If you have difficulty fitting the next part with all the pins, you can insert the pins only in the 4 corners. This will hold without any problem).

Repeat the operation with the following parts.

Light diffuser (optional)
For a more diffused light, you can print the light diffuser. If the light is too weak, you can unscrew the aluminium casing from the LED lamp and remove the original diffuser.