Trident Bookmark

Hueforge bookmark of a golden trident on a base of red lilies made from an AI image

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    Generic PLA White Transmission Distance: 5
    Generic PLA Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Gold Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with White
    At layer #8 (0.72mm) swap to Black
    At layer #9 (0.8mm) swap to Red
    At layer #14 (1.2mm) swap to Black
    At layer #15 (1.28mm) swap to Gold
    At layer #23 (1.92mm) swap to White for the rest.