hair straightener holder
Print Profile(1)
Description
Please read through everything so that there are no misunderstandings!
I have designed a hair-straightener holder for the windowsill and would like to share it with you. The holder is printed from PLA Basic, with my settings there should be no problems.
I split the model into two parts for printability! As you can see from the pictures, the parts are joined together using superglue. The bolt/hole connection only serves as a guide. They are not designed as a press fit.
The thickness of the window sill must be 20mm.
The screw is tightened with an 8mm hexagon and does not have to be screwed in all the way, tighten with feeling and see if the holder is stable.
I have also uploaded other projects in the same design, you are welcome to take a look at this model too!
hair dryer holder -→ https://makerworld.com/de/models/1037370#profileId-1021462
cable holder -→ https://makerworld.com/de/models/1055292#profileId-1042682
screw-on hooks -→ https://makerworld.com/de/models/1087195#profileId-1080128
I would love to hear your feedback!
Feel free to show me the printed parts, and check out my other models :)
Boost Me (for free)
1 boost = 54g filament for my next project :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)