Search models, users, collections, and posts
AirTag Battery Extender (CR123A)
IP Report
Print Profile(1)
0.12mm layer, 2 walls, 20% infill
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
37
78
5
3
40
13
Released
Bill of Materials
List other parts
- 0,22 mm² Kabel x 2:
- Set Batteriekontakte 12 mm x 12 mm x 1: https://amzn.eu/d/aG3Er7W
- 12 mm runde Magneten, Dicke < 1.82 mm x 4: https://amzn.eu/d/13S6O88
Description
Content has been automatically translated.
This model combines an AirTag with a CR123 battery in a single housing.
The AirTag does not need to be disassembled to connect it to the battery, and no wires need to be soldered directly to the AirTag.
Both cables are routed through the housing and are therefore invisible.
The tolerance between the lid and the component housing is very tight, ensuring the lid remains secure even without the optional magnets.
The housing measures 58 x 58 x 21 [mm]
Depending on the lid's orientation, AirTag signals are either readily detectable or somewhat attenuated.
Additionally required adapter: AirTag bayonet adapter.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)