Since I did not like the look of the Victron Cerbo GX with all the cables coming out, I decided to make a cover for both the Victron Cerbo GX and GS.

Hey All!  I was annoyed by the way the 4.3 inch touchscreen of the JK BMS is mounted in the Yixiang battery box (but also in many other DIY boxes). I searched online for alternative ways to mount the display, but I could not find any that I liked, so I decided to design my own bracket. After some trial & error, I got a bracket that fits PERFECTLY, just the way it actually should have come from the factory.

I created this bracket as my Victron Multiplus 48-5000 frequently got an over-temperature warning during full load. In my opinion, the internal fan does not create much airflow in the unit, but rather recirculates the air in the unit itself. With my dual 80mm fan bracket, fresh air is forced into the multiplus and this seems to cool the unit much better. I used 2x Arctic F80 max fans (5000rpm) and I connected them to the relay output of the multiplus. (with a separate 12V power supply).