Print is almost perfect although printing nose has some difficulties due to nozzle 0.4mm nozzle size. Decided not to use ams because it use much more filament. Fixing pieces together sort of quite fun.

So cute.. But bottom of the head need improvement. After filing and sanding. It is better now.

Good design and good print. The hook diameter can be smaller to allow smaller key ring to put in.

A few poor honeycomb prints. Overall still can be use.

Failed on 1st attempt with pla. Subsequently, clean plate with ipa. Then 2nd print is good. 2x book end joints well. Print 2 pc at one time in p1s

Quality is insane. Printed total of 5pcs already over 1 month period. . Will print more. It is so useful.

No problem printing it. Perfect. Use 12% infill.

I scaled up x axis only to accommodate 10mm glass and infill change to 10%. Perfectly printed without any support. Finishing was smooth.

Perfect print.

Perfect print. And looks good with the plant

Perfect print. And super nice with the plant,

Perfect print overall.

Overall good print except the bottom of the funnel. Do u use tree support for that?

Good print

I have hard time fixing the joints. After I decided to use a pen knief to trim the male dove joint. Then things get easy to fix. Overall, good design. Less material use and finally I can see the top glass instead of the ams only. By the way, what is this 2 part for? Pls see last photo

Print is perfect. 15% infill is good. Use double sided tape to secure to the wall.

Print is good. Fits well but with slot of charging is troublesome. I have added this slot following another contributor. The reason why I use your drawing to modify is because the previous contributor with slot fits is too loose.

Perfect print. Regardless of scale. This photo is 125%

Prefect. Fits well

Perfect print.