Excellently mixed model that printed absolutely beautifully. The biggest headache was the rune placement as they are extremely tight. Everything else fit together nicely. Would suggest making a tongue and groove system for the top parts and each half, so the model parts could slide together and be more rigid instead of relying on glue only,

beautiful design! I made a couple of these for friends and they love them! thanks!

Turned out beautiful...1200mm version is nearly 5' long when assembled. Would recommend using a good sturdy epoxy vs. any other glue due to the weight and numerous joints. The round dowels are a tad big, to recommend using a drill bit that is slightly larger to help them fit properly. The square dowels are a bit loose and will need to be glued well. The print was done in all silk PLA colors (gold, blue, silver), except for the yellow stone rest.

Flawless

Very nice looking bone dragon with exceptional detail, even when printing from a .4 HF nozzle! The leg movement is a little stiff, perhaps the links are on the narrow side. Otherwise, absolutely beautiful!

Nice model, but the dimensions are a little shy, compared to my stock key. So, I brought it into blender and built a new keyway from scratch, but appended the head of the key from your model. The original key (second picture, key on the right) with the rounded edges prints at a 3mm height on the main keyway and a length of 36 mm. The stock key measured at 4 mm height on the keyway and 35 mm in length (second picture, model on left). I also made a more ornate version, for giggles (third pic). I also needed to make an extended length version for my neighbor who needed a 44 mm key, Also, I'd recommend printing lengthwise for strength...Printing standing up is much weaker.

Turned out beautiful, like the rest. Thanks!

Another perfect model...Glad there's a lid mod out there for the air tube. Thanks!

Absolutely perfect. Thanks!

Absolutely cute! I modified the color scheme to make it out of a red/black silk for the body and made it a tad larger, but otherwise it's perfect!

Printed in PETG and works well, except for the little wedge that is separate, which has to be glued on later. I'd recommend making it slotted, so it can be fit right into the separator and detached when not needed. Otherwise, a nice design!

This turned out beautifully and is perfect for the battery-powered tealight candle in the basic Makersworld kit. Highly recommend!

cute, but the low circle on the chest hardly shows at normal scale

awesome design with tremendous detail !!!

Definitely addictive and love the tactile feel. Thanks!

Perfect model and prints great without supports. Printed with PETG and looks great compared to my old print in PLA.

not too bad. would’ve been nicer if the indicator notch was deeper. but overall a good functional knob

This tube roller works perfectly right out the gate. Simple to use and I love how it stands. Highly recommend & definitely will be printing more of them!

Just when you though poop couldn't get any better, then came along the poop-shute! Overall this project worked out perfect and all parts attached nicely to the H2D. Thanks!