Fun butterfly ring for children - size 3.

This honeycomb hinged box took some tuning to get perfect, but slowing the first layer to 15 mm/s made all the difference. The print-in-place hinge and clasp work great, and the honeycomb top gives it a really satisfying finish — especially on textured or effect plates. Compact, strong, and clean. Curious to see what everyone uses theirs for.

New release: Forked Knob Guard V2. Same idea as my original Samsung front-control guard, but rebuilt with a thicker print-in-place hinge and sturdier forks for better durability. If you printed V1, this is the upgrade—would love feedback on fit!

🧰 Print-in-Place Hinged Utility Box This is a fully print-in-place hinged box with an integrated clasp — no assembly, and no extra hardware required.

A clean, modular two-tier drawer organizer with optional internal dividers. Designed for flexibility and printed cleanly in PLA.

A simple, reusable storage jar with a screw-on threaded lid (M40×3). Use it for small parts like screws, nuts, bolts, washers, coins, beads, meds/vitamins, or anything you want to keep contained. Print the jar and cap, twist to close, and scale the height if you need more capacity. For best fit, clean up any stringing on the threads before first assembly.

New upload: Sliding Utility Knife (Razor Blade). Modeled like a box cutter but thickened for strength, and I added internal bumps/detents so the slider doesn’t creep open. Uses a standard single-edge razor blade. Print body + slider, assemble, and always store with the blade covered. Use at your own risk and keep away from kids.

New model! Penguin Toothpaste Squeezer Stand 🐧 I included two print profiles so you can choose what you prefer: FULL_LAYERS = colors all the way down (cleanest edges, but more purge/time) TOP_LAYER = colors only in the top 0.8mm (way less purge + faster). Both profiles are PLA. Let me know how it prints!

New upload: EMR40 Full Enclosure Travel Case. Made this because the device’s button can get pressed in a bag and turn on during travel (and it can get hot). This is a 2-piece press-fit full enclosure for storage/transport. Remove the device before operating/charging. Two PLA print profiles included (standard vs durable).

Print-in-place fidget spinner for overactive littles (PLA). Quick heads-up: sometimes the tiny ball contact points don’t stick well at first. Clean your plate with IPA; if it still acts up, switch to a smooth plate and watch the first few passes. After printing, twist the center hub back/forth, then twist each ball slightly to break them free. 14mm center hole fits small fingers. Let me know how it spins!

Just uploaded a multi-purpose sifter/strainer bowl with a pour spout + side handles — 3 sift sizes included: 2.5mm, 3.5mm, and 5.0mm holes. I originally made it to separate milled bird seed from pellets/whole seed so I can dump the good stuff back in without wasting it. Not intended for human food contact. Feedback + Boosts appreciated!

Check out these awesome Samsung stove knob guards. They prevent accidental bumping which can lead to fires.

I designed a simple set of labeled bathroom bottles with embossed text and an easy screw-on / screw-off cap. Clean look, grippy in the shower, and you can spot the right bottle at a glance.

New forked/open-top take on my Samsung front-control knob cover—same footprint/hinge as the full cover, lighter, and the center stays open so you can see/grab the knob while it still blocks bumps. Install the same (clean surface + small heat-rated adhesive dots). Lives near heat → print PETG; smooth plate helps. Need full coverage instead? Check the clear-lid version on my profile.

Made this after the flimsy OEM latch. Front-control knobs sit at hip level and get bumped—gas/fire risk. Stronger latch + hinge, sticks on with 2–3 mm adhesive dots. Print in PETG; clear lid helps see On/Off (mine’s a bit cloudy). Mine’s working well; I’m iterating hinge options and will post updates. If you hit issues, ping me and I’ll help.

Made this after the flimsy OEM latch. Front-control knobs sit at hip level and get bumped—gas/fire risk. Stronger latch + hinge, sticks on with 2–3 mm adhesive dots. Print in PETG; clear lid helps see On/Off (mine’s a bit cloudy). Mine’s working well; I’m iterating hinge options and will post updates. If you hit issues, ping me and I’ll help.

Made a simple stand for the Apple MagSafe Charger (MX6X3LL/A) to hold an iPhone 14 at a clean angle. Press-fit pocket with a rear cable channel; low profile for desk/nightstand. If your puck fit is tight/loose, nudge XY scale ±1–2%. Apple charger link: https://www.apple.com/shop/product/MX6X3LL/A/magsafe-charger-1-m

Sharing a simple organizer for Bambu P1/P1S/X1—holds six complete hotends, the bed scraper, two Allen keys, the extruder/extruder-cleaner, and a few grease packets. Prints upright with no supports; finger-pull and rounded edges for easy access. If it’s useful, I’d appreciate any suggestions for improvements.