When I'm packing my hiking bag, I like to store my cooking equipment inside the pan. But it's cramped for so much stuff. That's why I created this extension, which is used between the pan and the lid. This model was created for the Decathlon pot kit. But it can be used with other models of pots with lids; just adjust the scale to the pot's diameter. This extension can only be used with the pan cold. Wait for the pan to cool down before using it. You cannot cook with the extension in place.

Depth stop for 5mm drill bit. I decided to create this depth stop for drill bits because the models I found were limited in the precision of the position on the drill bit. This model has a system that hugs the drill bit more evenly, allowing for a more secure hold. For this piece you need an M3 nut on an M3x10mm screw.

RC motor and propeller mount, with battery and electronic component holders. Ideal for testing propellers and motors.

After many accidental pulls on the usb-c plug on my think pad I decided to create this protection to prevent damage to the usb plug. (LENOVO - T14S) V1 - Protects the USB-C plug. V2 - Protects the USB-C connector and prevents screen damage in case of accidental closure. V3 - Protects the USB-C connector and cable, prevents screen damage in case of accidental closure.

A Art Deco house lamp. Made with a single filament and 3D printed in white. Featuring the phrase "Bakery Love". Baking with love is a fundamental ingredient for a better life. This lamp was inspired by the Danish spirit of Hygge. It also looks great among books in a library. I recommend using an LED Flame Tea Light. DO NOT USE CANDLES WITH REAL FLAME.

A cozy house-shaped lamp. Made with a single filament and 3D printed in white. Featuring the phrase "Bakery Love". Baking with love is a fundamental ingredient for a better life. This lamp was inspired by the Danish spirit of Hygge. It also looks great among books in a library. I recommend using an LED Flame Tea Light. DO NOT USE CANDLES WITH REAL FLAME.

I created this rack to organize my hiking accessories. To make it easier to organize and choose my accessories when I go for a walk. Printed in PLA.

A cozy house-shaped lamp. Made with a single filament and 3D printed in white. Featuring the phrase "Love is all you need" to remind you that all things, even the simplest, begin with love. This lamp was inspired by the Danish spirit of Hygge. It also looks great among books in a library. I recommend using an LED Flame Tea Light. DO NOT USE CANDLES WITH REAL FLAME.

Tallerines cutters, 6 and 4 blades, made on a 3D printer with PLA or PETG filament. Object created for homemade Italian cooking. A good tallerines recipe: https://www.youtube.com/watch?v=3OcVxNJ69Gc

Tallerines cutters, 6 and 4 blades, made on a 3D printer with PLA or PETG filament. Object created for homemade Italian cooking.

Ravioli cutter and sealer printed in PLA plastic. Two pieces, with a metal shaft made from a clip.

Axe guard made of PLA plastic and an elastic band.

Hinges for polystyrene light reflectors for studio photography. They allow the reflectors to be positioned vertically, providing better light control. A metal clip is needed to act as an axle for the hinges.

My dog ​​was always getting into my attic. I decided to create this sliding Styrofoam gate to keep my dog ​​out. This gate acts as a visual barrier. It is not recommended for large dogs or very determined dogs. This gate is made of 3 pieces printed using 3D printing.

Door wedge shaped like an airplane wing profile. A fun design for airplane enthusiasts.

After many accidental pulls on the usb-c plug on my think pad I decided to create this protection to prevent damage to the usb plug. Second version safer for the screen. (LENOVO - T14S)

Every year I have swallows building nests in the walls of my house. The walls always get dirty with the activity of the swallows. I chose to build a nest that would make the nest-building work easier and prevent the walls from getting dirty. The nest has two holes for fixing to the wall and many holes so that it can be well ventilated. I opted for a rustic draft print so as not to clash with the natural construction of the swallows' nests. I added a stick so the birds could land on the nest.

Rugged toolbox, printed on the A1 MINI. With capacity to store 28 types of printer tools and accessories, divided into two sides, closing and fixing with simple elastic band of two types. I recommend that 3D printing be done with Bambu Smooth PEI plate, PLA filament, Bambu Hotend A1 0,4mm. Use Ironing on the “Top surfaces”. On the two small parts “lingua” and "Lubricant tool" need to be printed with an outer brim 5mm and some work with sandpaper - Developed with Onshape software.