The project has been upgraded with a new board and is now fully functional. A precompiled version is also available, take a look! You can now track shipments, monitor stock levels, check weather updates, view Bambu stats and printer status, manage events, and more—all in one place.

exhaust air duct connector that connect to the External Exhaust Fan Kit - P2S the main difference is that my design uses a 90° elbow configuration low profile adapter , the 75mm OD can be used with a FNATR Filter

This is a desk version of my previous project using a Waveshare 7.5" e-Paper display, redesigned with a minimalist look. In another version, I used an ESP32 powered. Depending on the display and code (sample provided), partial refresh is supported, allowing faster updates. ⚠️ Handle the display carefully—do not force it into the case.

I designed a custom exhaust air duct connector that connect to the External Exhaust Fan Kit - P2S the main difference is that my design uses a 90° elbow configuration, adapted to my specific installation constraints. This can be mounted so that the elbow is in any of the four quadrants (0,90,180,270deg). However, if you mount it vertically, you should not use the trap.

I created this brace to provide additional support and relieve stress on the hub

I would like to promote my foldable and adjustable laptop stand. Please let me know what you think about it and if you have any suggestions are more than welcome. I’m here to learn.

These guides were created to help mount the Lorex N910 on a sheetrock wall. The design consists of two separate pieces, so make sure to measure carefully to align them at the correct distance.

These guides were created to help mount the Lorex N910 on a sheetrock wall. The design consists of two separate pieces, so make sure to measure carefully to align them at the correct distance.

Today I received my new Elegoo filament, but I was not able to load it into my AMS Lite. Therefore, I created this spool adapter. More info will come later today.

Using this chalk holder helps keep your hands clean and protects the chalk from breaking with magnet to stick on the board frame

This is a stand for Xiaomi Mijia, what to say more

Mount for Xiaomi Mini Mijia Thermometer – Keep an Eye on the Temperature! Mounting the thermometer securely. Adhesive solutions didn’t work well and complicate the battery replacement when need it, so I designed a dedicated mount to attach it to the top of the AMS Lite.

Using this chalk holder can help keep your hands clean and protect the chalk from breaking. It also features a lateral window, allowing you to see how much chalk is left.

This can hold 10 chalk measuring 80x10 mm for easy transportation. The top sliding mechanism may feel tight at first; you will need to gently force the movement 5–10 times to clean the guide.

Customizable Dog Tag – Perfect for Medium to Large dogs Personalize your dog tag with your friend’s name for a truly unique accessory!

Often, I accidentally pressed the button of my Liftmaster 890 MAX to open my garage door. To prevent this, I built this sliding door cover. The cover is slightly larger to make opening it easier by squeezing the sides and sliding it.

Customizable dog tag.  Write the name of your friend, the best result is using an AMS but there is also the option to avoid it I added a new project (in a working beta) with the AirTag for medium/large friends https://makerworld.com/en/models/980426

Customizable Dog Tag with Apple AirTag – Perfect for Medium to Large Dogs

Customizable dog tag.  Write the name of your friend, the best result is using an AMS but there is also the option to avoid it