Printed with no issues

Printed great. I don't have any glocks so I can't confirm fitment, but my buddy said he loves it.

Printed just fine for someone. Haven't had complaints of mag fitment. It went together as expected

Printed just fine, and had 3/4 of brands I was asked to make labels for. Fitment was as expected

Made some for a coworker, and he wanted "AR-15", so that's what I made. I think I tried a .3 layer height and it was too tight so I stepped it down

One of the first things I printed, and it went great! I did a custom drawer and didn't realize the design was different until I put it in, lol. But I love it, thanks!

I used the V1 for my own guns, but when I showed a coworker he asked for some, so I made him the V2 because it's adjustable. Printed great. I imagine if he had a smaller muzzle he can flip the muzzle rests and it'll get narrower.

No issues, and works as intended

I printed some of these for our fire engine, as some of them don't have good spots to put labels. I like the flush version the best, as it doesn't hit your fingers when you grab the handle. I scaled them to size for the various sizes, and to adjust tightness

I didn't use them for glock mags, but I did use them for another gun. I think I ended up using it for a smaller P322 magazine to angle it away from the barrel so it fit behind the gun

The CZ and PDP fit P365 mags perfect. I have a P322, and I thought the magazines were a little tight and I moved the whole rack when I removed it. I used another one for that, but also because in front of the gun it would hit the barrel, so I wanted to slightly angle the mag.

Fits perfect

Worked great! i just picked up a new gun and put the HF gun light on it, and it fit the biggest one. I believe the HF light is a replica of the TLR 1, so it'll fit both of those.

I printed a bunch of these in PETG IIRC, and they work great. Not all of them come out perfect, I had to poke holes through the rough spots, and then I filled them up with dead batteries. The threads sometimes don't have good adhesive and some come off, but there's enough thread that it's not a problem and they are all real smooth.

Printed better than I thought. There's almost no scaring from the supports. I was surprised

Printed fine and works as intended

Update: I uploaded a remix with a screw. Works great in PLA. No issues with the hinges and I didn't edit that part. It works great, just not very durable. It slides with ease, but if someone takes it on and off a couple times it breaks. I did a couple In ABS, and they work, but they aren't durable like I said, so I tried TPU for AMS. The tolerance for the hinges wasn't enough, so it wouldn't unstick. So don't use that. Perhaps it could be scaled in a way that makes it work. I printed a couple in PETG HF (RIP), and we'll see how they hold up. It should be more flexible than ABS, so the locking mechanism shouldn't break. If I have issues I'll probably make a remix of this to include a small machine screw so it doesn't pop open inadvertently. I like to leave this in the middle of the leads, and then throw the stickers on , so it's aligned in 3 places

I had lots of issues printing the top with a 0.3mm nozzle so I went back to a 0.4mm nozzle to print this. I printed it in ABS originally, but I didn't like the gloss, so I used some PET-CF. It matches the OEM black better. Downside is that my thumb kept slipping off of it when firing (uncomped). I ended up printing it with Fuzzy Skin enabled to add some texture. I haven't shot it since adding the fuzzy skin or comp, but I plan to. It fit my P365 and P365XL just fine. Downside is that they're my EDC and car gun, respectively. I don't have any holster set ups that would fit this ATM, so it's in the range bag. If you plan to use this for something not in a holster, it won't be a problem. The nuts and screws will suck in no problem, and they stay there, which allows me to keep them together when off the gun.

Printed just fine